how to clean food processor


how to clean food processor

How to clean food processor? easy way to clean food processor, do you know.

Do not think that it is a complicated machine and that cleaning is difficult.

The food processor is one of the important kitchen tools.

It helps you a lot in making recipes.

Its power can grind many different foods.

In this article, we will share 5 steps on how to clean food processor: Things to Know!

How to Clean Food Processor? Instructions for Cleaning a Food Processor


 How to clean food processor?

Here are 5 easy to clean food processor steps that you should know:

1. Disassembling parts.

2. Clean the blade.

3. Wash other parts.

4. Clean the engine.

5. Dry and reassemble parts.

Best Professional Food Processor

Consumer scores by function

Sheerness: 9.4 Score

Blending power: 9.6 Score

Easy to assemble: 9.6 Score

The customer reviews for the product: 27,204 ratings

Go to the best professional food processor on Amazon

A food processor is a convenient tool that helps you grind a wide variety of foods.

Even meat will become easier to shred with this tool.

However, cleaning it is a problem.

Many people think that cleaning a food processor is very annoying.

The reason is that it has too many complicated parts and sharp blades.

It can hurt the person cleaning it if not careful.

Many people for various reasons are afraid to clean their food processor.

Followed by some results like not using this machine to grind their food.

As a result, there is no desired puree.

Others, cleaning through the speaker makes the blender easy to damage and very dirty.

Cleaning the food processor after each use is really necessary.

Join us to learn the detailed steps of this process!

1. Disassembling food processor parts

how to clean food processor


Food processors are made up of many different parts.

One of them is removable for easier cleaning.

Don’t worry you can’t remove them.

Each part has coupling parts that can be easily disassembled.

Before proceeding to disassemble the parts, make sure you have disconnected the power.

If the easy food processor is still connected to power, you may accidentally start it up.

This situation is very easy to injure you because the blade of the food processor is very sharp.

After grinding food, the inside of the blender may contain a lot of sticky leftovers.

Especially the small and tight slots.

Disassembling all the removable parts will help us clean more.

Remove the top of the blender like the pusher, the bowl, and especially the blade.

You should be careful when removing the blade.

To be able to chop all kinds of food, the blade of the food processor is really sharp.

Wear a thick rubber glove and skillfully remove the blade.

Set aside the blades to wash them separately.

 2. Clean the blade food processor


how to clean food processor

The blade is the most important part of a food processor.

It has the role of chopping up all the food that comes in.

That’s why we have to clean it carefully.

Avoid damaging or leaving stains.

It may rust and no longer work as well as it did in the beginning.

The blade should be washed immediately after using the blender.

This helps the blade stay sharp and does not get caught by food.

Another problem is if the blade is soaked for too long in water or food.

The blade may become dull or reduce sharpness. Especially after grinding foods with a lot of plastic.

A dull blade will not be able to chop food to the perfection you want.

Over time, the blade will become inoperable.

Before washing the blade, you should prepare a pair of gloves to avoid injuring the blade.

The blade is extremely sharp, so be careful during the washing process.

Use a soft pad and mild soap to scrub the blade. Rub gently to avoid scratching the blade.

After the blade is clean or use a clean, dry towel to wipe off any water on it.

Blades exposed to water for a long time may rust.

This seriously affects the quality of work and food after grinding.

3. Wash other parts

You can wash these removable parts with warm water, and mild soap.

It can be said that the easiest to clean food processors.

Especially the parts of the machine after disassembling.

All these loose pieces are the parts that make the blender more complete.

Most of them are made of high-quality hard plastic.

Use soft dish soap.

Avoid excessive rubbing that may chip or scratch them.

Strong or highly corrosive cleaning agents can damage these parts.

In some cases, detergents may thin the removable parts.

Make them crack.

If the round side dishes are really hard to clean, you can soak them in water for a few minutes.

Soaking in warm water will make the food separate faster.

You should avoid cleaning removable parts in the dishwasher.

Dishwashers can crack or damage them.

If any one of these many parts is damaged.

Your blender will no longer work.

4. Clean the engine

During the process of grinding food, the motor container underneath may become dirty.

The cave inside may not function properly if not cleaned properly.

You should use a damp but low-moisture cloth to clean this base.

The easiest food processor to clean will not have too many gaps or textures in the base.

They usually have a simple design and are easy to clean.

You only need to perform simple cleaning movements to clean them.

If trying to get stubborn stains on the sole.

Use baking soda or mild soap to clean.

Do not put water on the food processor to clean it.

What you should do is soak any possible cleaners on a damp cloth.

And wipe the spot where there are stains.

In small slits like lines between buttons.

Use a cotton swab soaked in water or mild soap.

Cotton swabs are tiny and can be easier to clean.

White vinegar is a solution for cleaning the body of the device.

Because the cleaning and cleaning ability of vinegar is very good.

5. Dry and reassemble parts – how to assemble food processor

Any part of the food processor should not be left for an extended period of time.

It may damage the machine or reduce the working efficiency.

What you should do immediately after removing stains is to dry them.

You should dry the food processor with a clean rag, then reassemble it and store it in a dry place.

All parts should be cleaned, leaving standing water that may affect the quality of the machine.

Tips to make food processor easy to cleahow to clean food processor

Run the machine with water before cleaning.

This is one of the tips that can remove dirt in the first step.

The strong rotation of the blade will create a whirlpool inside the food processor.

This strong pulling force can pull away some of the leftovers.

While running the machine with water you can add some substances such as baking soda or 1 lemon to the water.

Both of these substances have a cleansing and deodorizing effect.

You can mix baking soda with water in a 1:1 ratio for high efficiency.

If the food sticks strongly to the surface of the blender bowl.

Remove it from the machine and soak it in warm water for a few minutes.

You can add a little more vinegar and baking soda. Stains will be removed quickly.

A toothbrush can clean the blade better than a sponge.

Often the blades in the blender will be serrated.

Their sharpness will make cleaning difficult.

A soft toothbrush can easily brush away the excess residue.

Be sure to dry all parts of the food processor before reassembling and storing.

Some tips to help your food processor last longer

Read the instructions carefully before use.

Avoid grinding foods that the machine cannot grind.

This will protect the blade of the machine.

Always clean the machine after each use.

Do not let the dirt stick on the machine for a long time.

Cut food into small pieces before grinding to protect the machine from overloading.

Do not use hot water inside the machine while it is working.

If you want to add food to the machine.

Let’s add slowly and little by little

Frequently Asked Questions

1. If I don’t have any detergent, what can I use to clean the stain?

You can use lemon or warm water.

Lemon can clean stains and deodorize.

Soaking in warm water makes stains easier to remove.

2. What can I use to remove stains on buttons?

You can use a cotton swab soaked in alcohol or vinegar to remove stains on the button.

You can also use baking soda.

3. Should I deep clean the inside of the food processor?

You should perform a deep cleaning of your food processor every few months.

It will make sure your blender works properly and safely.


The food processor is an important kitchen tool. how to clean food processor

Although it looks quite complicated, it is very easy to clean.

You can clean it easily.

In this article, we have shared with you how to clean food processors.

With 5 easy steps, you can clean your modern food blender!


Category: BLOG

Similar Posts